岩棉复合板岩棉复合板是在的基础上增加了水泥抹面，使岩棉板在安装使用中工期缩短70%，有效的提高了工程进度。
岩棉复合板的主体材质是玄武岩棉板，、铁矿石、等为主要原料，经过高温融熔加工加入适量粘结剂成的人工无机纤维，具有质量轻、导热系数小、、不燃的特点。
中文名
岩棉复合板
外文名
rock
wool composite board
研发时间
1976年4
类 型
工业保温隔热用品
特 点
工期短、质量轻、导热系数小
作 用
保温、隔热、吸声
研制官方
卓效建材
目录.
1
.
2
.
▪
.
▪
.
3
.
4
性能介绍
岩棉复合板是在的基础上增加了水泥砂浆抹面，加固了岩棉板的硬度，直接省去了施工时上墙抹灰的过程，使岩棉板在安装使用中工期缩短70%，岩棉板是以玄武岩及其它天然矿石等为主要原料，岩棉板经高温熔融成纤，加入适量粘结剂，固化加工而制成的。岩棉板产品适用于工业设备、建筑、船舶的绝热、隔音等。
产品特性
岩棉特点1、外观质量：表面平整，不得有妨碍实用的伤痕、污迹破损。
2、燃烧性能：a级不燃
3、耐温性：800度。
4、吸湿性：>200%
5、容量：≤150
6、氧指数：0
7、导热系数：0.04~0.055（w/mk）
特性该产品在工艺上经粘合加压、修边、压槽、落料，形成企口式复合板，整体性好，刚度高并具有抗冲击、抗剪的力学性能及保温、隔热、隔音、防潮等特点。其板长不受限制，可达12米以上，完全符合技术设计上的防火要求。且克服了以往板材没有足够的整体性和刚度、抗折和抗冲击性能较差的缺陷。
彩钢岩棉夹芯复合板：是彩色钢板为面层，岩棉、防火、阻燃的保温材料作芯层的新型建筑材料。具有重量轻、隔热好，吸音及密封存存性好，施工方便，周期短，综合造价低，抗弯，搞腐蚀，外型美观等明显优势。品质特征：
1)隔热保温，导热系数：0.035w/m.k。
(2)强度高，可作围护结构，承重结构，抗弯抗压，一般房屋不用梁柱。
(3)色泽鲜艳，无需表面装饰。
(4) 安装灵活快捷，施工周期可缩短40%以上。
适用领域
广泛用于钢结构厂房、简易活动房的屋面、墙体、空气洁净室的吊顶与隔断。
产品特点：
彩钢岩棉复合板产品为a级防火板材
1.防火性能好：
岩棉物为内芯层或，可是任意防火等级要求；
2.彩钢岩棉复合板隔热保温：
导热系数λ≤岩棉0.044w/m.k 导热系数λ≤玻璃棉0.031/m.k；
3.彩钢岩棉复合板色泽鲜艳:
不需要表面装饰,彩钢板防腐层保持期为10-15年,彩色镀铝锌板防腐层保持为30-45年；
4.彩钢岩棉复合板抗弯抗压,承载力高:
即可作护围结构,又可作承重结构,一般房屋不用梁柱；
5.彩钢岩棉复合板安装灵活:
夹芯板的宽度为950型 1150型,表面层可压筋和不压筋,长度可按用户要求长度定尺寸生产,施工周期短,综合造价低；
6.彩钢岩棉复合板适用范围:
净化工程、船舶、食品、空调、厂房、锅炉房、楼层、活动房、冷库、仓库、办公室分隔、隔音等。
体系结构
岩棉复合板的体系结构主要由：粘结层、保温层、抹面层、饰面层及配件组成。
粘接层为建筑归于，是介于底层和面层之间，首要用将上下两层牢牢粘接在一起，其填充物主要来源于无机物。
保温层为避免和削减汽轮机的热量向环境流失，在汽轮机及管道等外外表敷设的保温材料层，其主要填充物一定量的有机物，水分，还有等。
饰面层应选用饰面砂浆、点缀灰浆等轻质功能性涂层或有杰出透气性的水性外墙涂料，这样让岩棉复合板保持了其轻质的特性，也增加了其美观度。
配件主要选用各类涂料，一方面增加岩棉复合板的表面的颜色，让其可以适用于任何环境还有涂料可以一定程度上其到阻燃以及保温的作用。
rock wool composite board
edit
the rock wool composite board is based on
the rock wool board adding cement wipe surface, which can shorten the
construction period by 70% in the installation and use, and effectively improve
the progress of the project.
the main material of rock wool composite
board is basalt cotton board, basalt, iron ore, bauxite and so on. the
artificial inorganic fiber, which is made by adding proper amount of binder
through high temperature melting processing, has light weight, small thermal
conductivity and heat absorption. the characteristic of being noncombustible.
chinese name
rock wool composite board
foreign name
岩棉复合板
research and development time
1976 4
class type
industrial insulation products
special point
short duration, light mass and small
thermal conductivity
for use
insulation, sound absorption
development of official
effective building materials
catalogue
1 performance introduction
2 product characteristics
▪rock wool characteristics
▪characteristic
3 areas of application
4 architecture
performance introduction
edit
the rock-cotton composite board is the
process of adding cement mortar wipe surface on the basis of rock wool board,
strengthening the hardness of rock wool slab, and directly eliminating the
process of plastering on the wall during construction. in order to shorten the
construction period of rock wool board by 70, rock wool board is made of basalt
and other natural ore as main raw materials. rock wool board is melted into
fiber at high temperature and appropriate amount of binder is added. rock wool
board products are suitable for industrial equipment, building, ship
insulation, sound insulation and so on.
[经] product features
edit
rock wool characteristics
appearance quality: the surface is flat,
must not hinder the utility of scars, stains damaged.
2, combustion performance: class a
noncombustible
3. temperature tolerance: 800 degrees.
4, hygroscopicity: > 200%
5, capacity: ≤ 150
6, oxygen index: 0
7, thermal conductivity: 0.04% 0.055 w /
mk)
characteristic(s)
the product is produced by bonding,
pressing, trimming, grooving, blanking, forming an opening composite board with
good integrity, high stiffness and characteristics of shock resistance, shear
resistance, heat preservation, insulation, sound insulation, moisture proof,
etc. the length of the board is not limited. it can reach more than 12 meters,
which fully meets the requirements of fire resistance in technical design, and
overcomes the defects that the former plates do not have enough integrity and
stiffness, and have poor flexural and impact resistance.
caigang rock-cotton sandwich composite
board: it is a new type of building material with colored steel sheet as
surface layer, rock wool, fire proof and flame retardant insulation material as
core layer. it has light weight, good insulation, good sound absorption and
seal storage, convenient construction and short period. comprehensive low cost,
bending resistance, corrosion, beautiful appearance and other obvious
advantages. quality characteristics:
1) thermal insulation, thermal
conductivity: 0.035 w / m. k.
high strength, can be used as enclosure,
load-bearing structure, bending and compression, general housing without liang
zhu.
the color is bright, does not need the
surface decoration.
the installation is flexible and quick, and
the construction period can be shortened by more than 40%.
applicable area
edit
widely used in steel structure factory
building, simple moving room roof, wall, air clean room ceiling and partition.
product features:
caigang rock wool composite board product
is a class fire proof board
1. good fire resistance:
rock wool is inner core layer or glass
fiber, but arbitrary fire resistance grade requirements;
2. colour steel rock wool composite board
heat insulation:
thermal conductivity λ ≤ rock wool
0.044w/m.k thermal conductivity λ
≤ glass cotton 0.031 / m.k.;
3. colored steel and rock wool composite
plates are of bright colour and lustre:
no need for surface decoration, color steel
plate anticorrosive coating for 10-15 years, color aluminum and zinc plate
corrosion coating for 30-45 years;
4. caigang rock-cotton composite plate has
high bearing capacity and flexural pressure.
can be used as a protective enclosure
structure, but also as a load-bearing structure, general housing does not need
liang zhu;
5. colour steel rock wool composite board
installation flexibility:
the width of sandwich panel is 950- type
1150, the surface layer can be compressed and not compressed, the length can be
produced according to the length of the customer, the construction period is
short and the comprehensive cost is low.
6. application scope of colored steel
rock-cotton composite board:
purification engineering, ship, food, air
conditioning, plant, boiler room, floor, activity room, cold storage,
warehouse, office partition, noise insulation, etc.
[计] architecture
edit
the system structure of rock wool composite
board is mainly composed of adhesive layer, insulation layer, wipe layer,
decorative layer and fittings.
the adhesive layer is attributed to the
building and lies between the bottom layer and the surface layer. the top and
bottom layers are mainly bonded together with the cementing material, and the
fillers are mainly from inorganic materials.
in order to avoid and reduce the heat loss
of steam turbine, the insulation layer laid on the outer surface of steam
turbine and pipeline is mainly filled with a certain amount of organic matter,
moisture and adhesive.
the finishing layer should be made up of
veneer mortar, light functional coating such as mortar or waterborne exterior
wall coating with outstanding air permeability, so that the rock wool composite
board can keep its light property and increase its aesthetic degree.
accessories mainly use various coatings, on
the one hand, to increase the color of the rock cotton composite board surface,
so that it can be applicable to any environment and paint to a certain extent
to the role of flame retardancy and heat preservation.
廊坊信富成保温材料销售有限公司
15128457965
中国 廊坊